Mech Research

List of Ph.D. supervisors

S.No Name of the Supervisor Designation Faculty Area Supervisor Recognition number
1 Dr. K. Kalidasa Murugavel Professor & HOD MECH Solar Energy, Thermal Power, Heat Transfer and Renewable Energy 1620154
2 Dr. D. Ravindran Professor MECH Manufacturing Engineering. 8220378
3 Dr. K. Manisekar Professor MECH Mechanical Engineering. , Engineering. Design 8320223
4 Dr.H. Kanagasabapathy Professor MECH Materials Science, Environmental Science 2720018
5 Dr. T. Vigraman Associate Professor (Sr. Grade) MECH Mechanical Engg. 2120542
6 Dr. S. Iyahraja Associate Professor MECH Thermal Engineering 3120051
7 Dr. M. Kathiresan Associate Professor MECH Thin Walled Shells, Conical Frusta, Crashworthiness, Composite, Fiber Metal Laminates 2920073
8 Dr. R. Harichandran Associate Professor MECH Composite Materials, Design, Refrigeration and Air conditioning 2920072

List of faculty members pursuing Ph.D.

S.No S.no Name of the Faculty Designation Month of Registration Ph.D. Name of the Supervisor University Current Status
1 1 Mr. D. Vignesh kumar Assistant Professor (Sr.Grade) Jul 10 Dr. D. Ravindran, Professor (Mech), National Engineering College,Kovilpatti. Anna University,Chennai Thesis Submitted
2 3 Mr P. Ramanan Assistant Professor (Senior Grade) Jul 13 Dr. K. Kalidasa Murugavel, Professor & Head (Mech), National Engineering College, Kovilpatti. Anna University, Chennai Work in Progress
3 4 Mr F. Michael Thomas Rex Assistant Professor (Senior Grade) Jul 11 Dr. D. Ravindran, Professor (Mech), National Engineering College, Kovilpatti. Anna University, Chennai Synopsis Submitted
4 5 Mr.S. Arul Selvan Assistant Professor Jan 14 Dr. D. Ravindran, Professor (Mech), National Engineering College, Kovilpatti. Anna University, Chennai Work in Progress
5 6 Mr R. Vijayakumar Assistant Professor Jan 18 Dr. D. Ravindran, Professor (Mech), National Engineering College, Kovilpatti. Anna University, Chennai Course work doing
6 7 Mr B.Prince Abraham Assistant Professor Jan 18 Dr. D. Ravindran, Professor (Mech), National Engineering College, Kovilpatti. Anna University, Chennai Course work doing
7 8 Mr A. Karthick Assistant Professor Jul-14 Dr. K. Kalidasa Murugavel, Professor & Head (Mech), National Engineering College, Kovilpatti. Anna University, Chennai Thesis Submitted
8 9 Mr R. Vignesh kumar Assistant Professor Jan 18 Dr. D. Ravindran, Professor (Mech), National Engineering College, Kovilpatti. Anna University, Chennai Course work doing
9 10 Mr S.R. Sundara Bharathi Assistant Professor Jan 18 Dr. D. Ravindran, Professor (Mech), National Engineering College, Kovilpatti. Anna University, Chennai Course work doing
10 11 Mr. A. Arul Marcel Moshi Assistant Professor Jan 18 Dr. D. Ravindran, Professor (Mech), National Engineering College, Kovilpatti. Anna University, Chennai Course work doing

INTERNATIONAL JOURNAL PUBLICATION

2017-2018

S.no Name of the Author(s) Title of the Paper Name of the journal Volume & Page No Month & Year of Publications
1 Mr.Ponnarengan
Mr. Harihara sakthisudhan
Mr.Swaminathan Jose
Dr. Kondal Manisekar
Dry sliding wear behaviour of single and dual ceramic reinforcements premixed with Al powder in AA6061 matrix Journal of Materials Research and Technology

Online

March 2018
2 D.Vignesh Kumar,
Dr.D.Ravindran,
Mr.N.Lenin
Mr. M.Siva Kumar
Tolerance allocation of complex assembly with nominal dimension selection using artificial Bee Colony algorithm Journal of Mechanical Engineering Science Online February 2018
3 Mr. A.Karthik,
Dr.K.Kalidasa Murugavel,
Mr.P.Ramanan
Performance enhancement of a building-integrated photovoltaic module using phase change material Energy, Elsevier Volume 142, Pages 803-812 January 2018
4 Mr.P.Harihara Sakthi Sudhan, Influence of metal powder premixing on Mechanical Behavior of Dual Reinforcement (Al2O3 (µm) /Si3N4 Journal of Alloys and Compounds Volume 731, Pages 100-110 January 2018
5 Mr.S.Jose (nm)) in AA6061 Matrix
6 Mr.P.Harihara Sakthi Sudhan, Mr.S.Jose Influence of metal powder premixing on Mechanical Behavior of Dual Reinforcement (Al2O3 (µm) / Si3N4 (nm)) in AA6061 Matrix Journal of Alloys and Compounds Volume 731 Pages 100-110 January 2018
7 Mr.S.R.Sundara Bharathi,
Mr.R.Rajesh Kumar,
Mr.A.Razal Rose,
Mr.V.Bala Subramanian
Mechanical Properties and Microstructural Characteristics of Friction Welded Dissimilar joints of Aluminium Alloys Transaction of the Indian Institute of metals Volume 5, Issue 2, Part 2, Pages 6755-6763 2018
8 Dr.Vigraman T Intermetallic Compound Formation At The Interface Of The Diffusion Bonded Joints Ti-4.5al- 2mo-1.8v- 0.5fe And Aisi 410 Stainless Steel International Journal Of Scientific Research Volume-6, Issue-12, Dec 2017
9 Dr.D.Ravindran,
Mr.Thankaraj Mariapushpam
Mr.Chenthil Jegan
Electrochemical machining process parameter optimization using particle swarm optimization Computational Intelligence Volume33, Issue4 Pages 1019-1037 November 2017
10 Mr.R.Harichandran,
Mr.N.Selva Kumar
Micro structure and mechanical characterization of (B4C+h-BN)/Al hybrid nanocomposites processed by ultrasound assisted casting International Journal of Mechanical Sciences -- August 2017

2016-2017

S.No Name of the Author(s) Title of the Paper Name of the journal Volume & Page No Month & Year of Publications
1 Dr.Kathiresan,
Dr.Manisekar
Low velocity axial collapse bahaviour of E-glass fiber/epoxy composite conical frusta Composite structures vol.166, 15, Pages 1-11 2017
2 F Michael Thomas Rex Dr.D.Ravindran An Integrated approach for optimal fixture layout design Journal of Engineering Manufacture Vol 231, Issue 7, 2017 page(s): 1217-1228 2017
3 Mr.A.Karthick,
Dr.K.Kalidasa Murugavel
Performance study of building integrated photovoltaic module Advances in building energy research journal 2017
4 High Temperature Wear Behaviour of Nano/Micro B4C Volume 70, Issue 1, pp 17– 2017.20.17
5 Mr.R.Harichandran Mr.N.Selvakumar Reinforced Aluminium Matrix Composites Fabricated by an Ultrasonic Cavitaion-Assisted Solidification Process Transactions of the Indian Institute of Metals 29
6 Mr.R.Arunkumar,
Mr.G.Esakkimuthu,
Mr.K.Kalidasa murugavel
Performance Enhancement of a single Basin Single Slope Solar still using Agitation Effect and external condenser Desalination Vol: 399 Pg.No: 198-202 2016
7 Mr.P. Madhu,
Dr.H. Kanagasabapathy
Mr.I. Neethi Manickam
Flash pyrolysis of palmyra palm (Borassus flabellifer) using an electrically heated fluidized bed reactor Energy Sources, Part A: Recovery, Utilization, And Environmental Effects Vol. 38, No. 12, pages 1699–1705 2016
8 Mr.P. Madhu,
Mr.I. Neethi Manickam
Dr.H. Kanagasabapathy
Production and characterization of phenolic compounds by flash pyrolysis of palmyra palm Energy Sources, Part A: Recovery, Utilization, And Environmental Effects Vol. 38, No. 15, Pages 2161–2169 2016
9 Mr.Michael Thomas Rex,
Dr.D.Ravindran,
Mr.D.Lenin
Prediction of work piece Elastic Deformation using FEM based contact analysis Mechanics and Materials, Vol.852, 498-503 2016
10 Mr.I.Sankar,
Dr.D.Ravindran,
Mr.I.Siva,
Mr.T.Manoharan
Investigation on wear behaviors and worn surface morphology of surface treated palmyra fruit fiber/polyester composites to appraise the effects of fiber surface treatments Polymer composites Volume39, Issue6 Pages 2029-2035 2016

2015-2016

S.No Name of the Author(s) Title of the Paper Name of the journal Volume & Page No Month & Year of Publications
1
2 Mr. Sam Stanley Suguntharaj Gnanadurai,
Mr.Anbarasan Vijay Kumar,
Dr.Kalidasa Murugavel
Mr.Kulandaivel
Performances of packed bed double pass solar air heater with different inclinations and transverse wire mesh with different intervals Journal of Thermal Science Vol.20, No. 1, pp. 173-181 2016
3 Dr.D.Ravindran, Mr.I.Shankar Fibre Loading and treatment effects on dry sliding wear of palmya fruit fiber composites Science and Engineering of Composite Material, 2014 Volume:23; Issue:2; Pg: 217-226; 2016
4 Mr.M.Maria Antony Raj Dr.K.Kalidasa Murugavel Mr.T.Rajaseenivasan Mr.K.Srithar A review on flash evaporation desalination Desalination and Water Treatment Volume 57, Issue 29 Pages 13462-13471 2016
5 Mr.D Venkatkumar Dr.D Ravindran 3D finite element simulation of temperature distribution, residual stress and distortion on304 stainless steel plates using GTA welding. Journal of Mechanical Science and Technology IF:0.838 Vol. 30(1) pages 67-76 2016
6 Mr.D.Vignesh kumar Dr.D.Ravindran Optimum Tolerence Proceedings of the Institution of Mechanical Engineers Part Volume: 230 issue: 19, page(s): 3488-3508 2016
7 Mr.M.Sivakumar Mr.M.N Islam Synthesis of Simple Assemblies with Nominal Dimension Selection using Genetic Algorithm C - Journal of Mechanical Engineering Science
8 Mr.M.Kathiresan Dr.K.Manisekar Axial crush behaviours and energy absorption characteristics of aluminium and E-glass/ epoxy over-wrapped aluminum conical frusta under low velocity impact loading Composite Structures Vol. 136, pp. 86–100, pp. 86-100. 2016
9 Mr.R.Satheesh Raja
Dr.K.Manisekar
Experimental and statistical analysis on mechanical properties of nano flyash impregnated GFRP composites using central composite design method Materials and design Volume 89, 5, Pages 884-892 2016
10 Mr.M.S.Starvin
Dr.K.Manisekar
The effect of manufacturing tolerances on the load carrying capacity of large diameter bearings Sadhana-Academy Proceedings In Engineering Sciences Vol. 40, Part 6, pp- 1899-1911 2015

2014-2015

S.No Name of the Author(s) Title of the Paper Name of the journal Volume & Page No Month & Year of Publications
1 Mr.N.Karthikeyan
Dr.K.Kalidasa Murugavel
Mr.S.Arun Kumara
Mr.S.Rajakumar
Review of aerodynamic developments on small horizontal axis wind turbine blade Renewable and Sustainable Energy Reviews Volume 42, Pages 801-822 2015
2 Mr.T.Elango ,
Mr.A.Kannan
Performance study on single basin single slope solar still with different water nano fluids Desalination Volume 360, Pages 45-51 2015
3 Dr.K.Kalidasa Murugavel
4 Mr.T.Elango Dr.K.Kalidasa Murugavel The effect of the water depth on the productivity for single and double basin double slope glass solar stills Desalination Volume 359, Pages 82-91 2015
5 Mr.R. SamuelHansen
Mr.C. SuryaNarayanan
Dr.K. KalidasaMurugavel
Performance analysis on inclined solar still with different new wick materials and wire mesh Desalination Volume 358, Pages 1-8 2015
6 Mr.K.S.Maheswari
Dr.K.Kalidasamurugavel
Mr.G.Esakkimuthu
Thermal desalination using diesel engine exhaust waste heat—An experimental analysis Desalination Volume 358, Pages 94-100 2015
7 Dr.K.Kalidasa Murugavel
Mr. K. Srithar
Effect of cover plate transmittance on solar still performance International Journal of Green Energy Volume 12, Issue 4 pages 431-439 2015
8 Mr.T. Rajaseenivasan,
Dr.K. Kalidasa Murugavel
Mr.T. Elango
Performance and energy analysis of a double-basin solar still with different materials in basin Desalination and Water Treatment, Volume 55, Issue 7 Pages 1786-1794 2015
9 Mr.K.Geetha
Dr.D.Ravindran
Mr.M.Sivakumar
Mr.M.N.Islam
Concurrent tolerance allocation and scheduling for complex assemblies Robotics and computer Integrated Manufacturing Vol. 35, Pages 84-95 2015
10 Ms. K.Geetha
Dr.D.Ravindran
Concurrent Tolerance allocation and scheduling for complex assemblies Robotics and Computer Integrated Manufacturing Volume 35, Pages 84-95 2015

2013-2014

S.No Name of the Author(s) Title of the Paper Name of the journal Volume & Page No Month & Year of Publications
1 Mr.J. Aldrin Raj,
Dr.D. Ravindran ,
Mr.M. Saravanan ,
Mr.T. Prabaharan
Simultaneous scheduling of machines and tools in multi machine flexible manufacturing systems using artificial immune system algorithm International Journal of Computer Integrated Manufacturing Volume 27, Issue 5 Pages 401-414 2014
2 Mr.G.Selvakumar
Mr.G.Sornalatha
Mr.b.Sarkarcs. Mitrac
Experimental investigation and multi-objective optimization of wire electrical discharge machining(WEDM) of 5083 aluminium alloy Transactions of Nonferrous Metals Society of China Volume 24, Issue 2, Pages 373-379 February 2014
3 Mr.M.Kathiresana
Dr..K.Manisekar
Mr.V.Manikandanc
Crashworthiness analysis of glass fibre / epoxy laminated thin walled composite conical frusta under axial compression Composite Structures Volume 108, Pages 584-599 February 2014
4 Mr.S. Rajakumar International Journal of Vol 68, 277 - 292, 2013
5 Mr.A. Razalrose Mr.V. Balasubramanian Friction stir welding of AZ61A magnesium alloy A parametric study Advanced Manufacturing Technology
6 Mr.S.Rajakumar
Mr.V.Balasubramanian
Mr.A.Razalrose
Friction stir and pulsed current gas metal arc welding of AZ61A magnesium alloy A comparative study Materials and Design Volume 49, Pages 267-278 2013
7 Mr.R.Satheesh Raja,
Dr.K.Manisekar,
Mr.V.Manikandan
Effect of fly ash filler size on mechanical properties of polymer matrix composite International Journal of Mining, Metallurgy & Mechanical Engg. Volume 1, Issue 1 (2013) ISSN 2320–4060 2013